10 Steps To Begin Your Own Volkswagen Car Key Replacement Business
Volkswagen Key Programming Tips
Volkswagen provides an easy method to replace the key that stopped working, or to add a second. With a few simple tips, the process can be inexpensive and simple.
First, you need to locate the correct key fob. It must have a key blade that flips out, or be attached to the key fob. Collect all the necessary documentation to prove ownership. Then, visit the locksmith or dealer.
Immobilizer
The immobilizer is a device that blocks keys that are damaged, or unauthorized, from getting the vehicle started. The system operates by recognizing a particular chip inside each key. A VW dealer or auto locksmith can program additional keys, but the process requires specialized software and tools. The right tools are required to have a smooth experience. Technicians should try to reproduce the issue before beginning the key programming. They should also scan the vehicle for fault codes, look for technical service bulletins (TSBs) and test the battery within the key fob.
A Volkswagen key that has an unprogrammed immobilizer chip shuts off the engine after a couple of seconds of cranking. The immobilizer chip does not stop the alarm from turning on or allowing doors to be opened. The key fob's immobilizer is an additional component that is attached to the flip portion of the car key. It needs to be programmed into the vehicle's computer in order to work.
Making a new key for a VW is more expensive than making duplicate keys in the event that all the original keys are lost. The key must be purchased from the manufacturer and undergo an exclusive programming process to be synchronized with the computer in the vehicle. This can be accomplished by a professional using a program like VagTacho and VCDS. This process is recommended for vehicles with the older Immobilizer 2.

Electronic Ignition
The electronic ignition feature of the key is an essential element of the anti-theft technology in the vehicle. It's activated every time the key fob is inserted into the ignition. It's not a perfect system however. It is susceptible to failures, which may result in your VW engine not running. This could be due to a number of reasons, including faulty key programming or a damaged car battery.
It is possible to avoid this issue when you have your Volkswagen car key fobs programmed professionally. This can be done by a dealer, or an locksmith. The cost of this service varies, but the most common prices range from $90 to $150. These prices also depend on the model of your vehicle and year.
You will need your primary key to program the new VW key fob. The new key should be able to turn on the vehicle. This will allow the onboard diagnostics to recognize the key as an authorized one. Then, volkswagen polo key fob will dim.
Certain models require a 3four-digit PIN to enable key programming onboard. Some models may require a scanning tool. A dealer or locksmith may utilize a scanner to program keys onboard. These tools aren't for sale in typical automobile accessory stores, so you'll need to purchase one or borrow it from the dealership.
Keyless Entry
If your Volkswagen key fob is experiencing battery issues, or lost it completely, it's likely that the car will start, but will not unlock. It's not difficult to fix the issue. First, make sure that the key fob is recognized by the vehicle. If it is, press and hold the lock button until the light on the key flash for six seconds.
This will reset the key fob's proximity to your VW. After that, you can try to unlock your vehicle by pressing the unlock button on the fob's key again. If the car doesn't unlock after this, you will need to contact the dealer to get the key programmed.
The cost of programming a brand new Volkswagen Key is often high. You should request quotes from several dealers prior to selecting the one that is best for you. Also, verify if the dealer charges for key programming, as well as for the new key itself.
Purchasing an additional Volkswagen key is a great idea for many reasons. You may need a backup key in case your primary key gets lost or stolen. Here are a few easy steps to follow if you've got an extra Volkswagen key and wish to program it to work with your Volkswagen.
Remote Start
Unlike previous generation key fobs, which communicated with the vehicle using radio waves, Volkswagen's remote start systems communicate with your car using a secure wireless connection over the cellular technology. VW Atlas, Jetta or Passat can detect that you are within range to activate features such as keyless entry or push-button start. The process is as easy as opening the app on your smartphone connecting it to your vehicle, and then pressing the button.
Before you do this ensure that your Volkswagen is parked and the driver's door is shut. This will ensure that only the proper key is used to access your vehicle’s features. If the key is not recognized the dashboard will display an error message. In addition, this method can only be used on newer VW models that use an RFID sensor ring on the steering column. These models require that an encrypted pin be programmed.
Close the door on the driver's side and remove the key that is used to create a new keyfob. Press the lock button of the new keyfob. This will signal to the vehicle that the key is a functional key. It will then begin to transmit signals that allow you to unlock the door to the driver's side and remotely start your car. Some people report that this only works if there is an unobstructed line of sight to the car, however others have succeeded even in parking areas that are crowded.